+91-7016610276

sales@turnerlathe.com

An ISO 9001:2015 Company

Turner

All Geared Head Lathe Machine

Have any Questions?
Call Us:

+91-7016610276 / 9374979077

Send Inquiry

LX 215 All Geared Head Lathe Machine

All Geared Head Lathe Machine

Send Inquiry
  • Special Feature
    • Bed is made from25 grade cast iron of 180 BHN hardness, strictly inspected with microlevel, hardness tester and straight edge.
    • Boring of head stock is done on WMW boring machine fitted with induction hardened and ground spindle made from alloy steel.
    • Double Screw Apron is totally enclosed in oil bath system with lever type arrangement for automatic feeds and fitted with gear made from alloy steel
    • All the gear in head strock are made from En-8 and with high range of speed. (Nitriding gear)
  • Double Screw Norton Gear Box
    • Provided as time saver equipment with separate thread & feed shaft. Thus, feed & thread gears could be changed rapidly and decreases the wear and tear of half nut and lead screw.
    • Instruction manual as per Indian standard IS – 1878 (part -1) 1993.
  • Colour Options
    • Blue & White (Two Tone)
    • Bayer Blue & Silver Grey (Two Tone)
  • Standard Accessories
    • Norton Gear Box (Double Screw)
    • Rear Splash Guard
    • Chuck Plate
    • Tool Post Key
    • Centre Adaptor
    • Dead Centre (2 Nos.)
    • Motor Pulley
    • Four Position Tool Post
    • Electric motor (3 HP, 3 PH. 1440 rpm)
    • V- Belt set for motor
    • Electric Panel Board (Hanging Type)
  • Extra Accessories
    • Dog or True Chuck
    • Coolant Pump, Tank & Nozzle
    • Quick Change Tool Post with tool holders
    • Taper Turning Attachment
    • Steady Rest
    • Follow Rest
    • Face Plate
    • Machine Lamp
  • Extra Features
    • Electro magnetic brake with foot fedal
    • A24 spindle
    • Any Special Requirement as per Customer’s Drawing.
  • Technical Data
    Specification 215 / LX -1 215 / LX -2 215 / LX -3
    Bed:
    Bed Type 2 V & 2 Flat 2 V & 2 Flat 2 V & 2 Flat
    Bed Length 1600 (5′ 3″) 1825 (6′) 2438 (8′)
    Bed Width 11” 11” 11”
    Gap Length 110 mm 110 mm 110 mm
    Gap Length in front of Face Plate 115 mm 115 mm 115 mm
    Capacity:
    Height Of Centre 215 (8.5″) 215 (8.5″) 215 (8.5″)
    Swing over Bed 440 mm 440 mm 440 mm
    Swing in Gap 680 mm 680 mm 680 mm
    Swing over Cross Slide 270 mm 270 mm 270 mm
    Distance Between Centre 720 mm 950 mm 1560 mm
    Movement of Cross Slide 200 mm 200 mm 200 mm
    Movement of Compound Slide 110 mm 110 mm 110 mm
    Main Spindle:
    Spindle Nose (Threaded Type) Ø 76.20 mm Ø 76.20 mm Ø 76.20 mm
    Taper Bore in Spindle Sleeve MT-3 MT-3 MT-3
    Spindle Bore Ø 54 (2.1/8″) Ø 54 (2.1/8″) Ø 54 (2.1/8″)
    Tail Stock:
    Quill Dia Ø 50.8 mm Ø 50.8 mm Ø 50.8 mm
    Taper in Quill MT-3 MT-3 MT-3
    Quill Travel 130 mm 130 mm 130 mm
    Speed:
    No. of Spindle Speed 8 8 8
    RPM (Low/High) 60 – 1100 60 – 1100 60 – 1100
    Feeds:
    Nos. of feeds Range 52 52 52
    Longitudinal / Rev. 0.067 to 1.198 mm 0.067 to 1.198 mm 0.067 to 1.198 mm
    Transverse / Rev. 0.014 to 0.264 mm 0.014 to 0.264 mm 0.014 to 0.264 mm
    Thread / No. of Range
    Metric Thread 20 (0.5 to 7.5 mm) 20 (0.5 to 7.5 mm) 20 (0.5 to 7.5 mm)
    English Thread 32 (4 to 60 TPI) 32 (4 to 60 TPI) 32 (4 to 60 TPI)
    Lead Screw Ø 1.25″ x 4 TPI Ø 1.25″ x 4 TPI Ø 1.25″ x 4 TPI
    Feed Shaft Ø 1″ Ø 1″ Ø 1″
    Electricals:
    Motor Power 3 H.P. / 2.25 KW 3 H.P. / 2.25 KW 3 H.P. / 2.25 KW
    General:
    Weight (Approx.) 750 Kg. 900 Kg. 1100 Kg.
    Floor Space Occupied in (mm) 1800 x 700 2125 x 700 2725 x 700
    (Approx.)L x W x H x 1200 x 1200 x 1200