Specification | 265 / 1 | 265 / 2 | 265 / 3 | 265 / 4 | 265 / 5 |
---|---|---|---|---|---|
Bed: | |||||
Bed Type | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat | 2 V & 2 Flat |
Bed Length | 1676 (5′ 6″) | 2135 (7′) | 2740 (9′) | 3050 (10′) | 3650 (12′) |
Bed Width | 323 (12.¾”) | 323 (12.¾”) | 323 (12.¾”) | 323 (12.¾”) | 323 (12.¾”) |
Gap Length | 165 mm | 165 mm | 165 mm | 165 mm | 165 mm |
Capacity: | |||||
Height Of Centre | 265 (10.5″) | 265 (10.5″) | 265 (10.5″) | 265 (10.5″) | 265 (10.5″) |
Swing over Bed | 520 mm | 520 mm | 520 mm | 520 mm | 520 mm |
Swing in Gap | 820 mm | 820 mm | 820 mm | 820 mm | 820 mm |
Swing over Cross Slide | 320 mm | 320 mm | 320 mm | 320 mm | 320 mm |
Distance Between Centre | 550 mm | 985 mm | 1600 mm | 1900 mm | 2500 mm |
Movement of Cross Slide | 240 mm | 240 mm | 240 mm | 240 mm | 240 mm |
Movement of Compound Slide | 140 mm | 140 mm | 140 mm | ||
Main Spindle: | |||||
Spindle Nose (Threaded Type) | Ø 76.2 mm | Ø 76.2 mm | Ø 76.2 mm | Ø 76.2 mm | Ø 76.2 mm |
Taper Bore in Spindle Sleeve | MT-4 | MT-4 | MT-4 | MT-4 | MT-4 |
Spindle Bore | Ø 54 (2.1/8″) | Ø 54 (2.1/8″) | Ø 54 (2.1/8″) | Ø 54 (2.1/8″) | Ø 54 (2.1/8″) |
Tail Stock: | |||||
Quill Dia | Ø 60.3 mm | Ø 60.3 mm | Ø 60.3 mm | ||
Taper in Quill | MT-4 | MT-4 | MT-4 | ||
Quill Travel | 180 mm | 180 mm | 180 mm | ||
Speed: | |||||
No. of Spindle Speed | 8 | 8 | 8 | ||
RPM (Low/High) | 30 – 1200 | 30 – 1200 | 30 – 1200 | ||
Feeds: | |||||
Nos. of feeds Range | 68 | 68 | 68 | 68 | 68 |
Longitudinal / Rev. | 0.066 – 2.359mm | 0.066 – 2.359mm | 0.066 – 2.359mm | 0.066 – 2.359mm | 0.066 – 2.359mm |
Transverse / Rev. | 0.016 – 0.564mm | 0.016 – 0.564mm | 0.016 – 0.564mm | 0.016 – 0.564mm | 0.016 – 0.564mm |
Thread / No. of Range | |||||
Metric Thread | 24 (0.5 -15 mm) | 24 (0.5 -15 mm) | 24 (0.5 -15 mm) | 24 (0.5 -15 mm) | 24 (0.5 -15 mm) |
English Thread | 44 (2-60 TPI) | 44 (2-60 TPI) | 44 (2-60 TPI) | 44 (2-60 TPI) | 44 (2-60 TPI) |
Lead Screw | Ø 38 mm x 4 TPI | Ø 38 mm x 4 TPI | Ø 38 mm x 4 TPI | Ø 38 mm x 4 TPI | Ø 38 mm x 4 TPI |
Feed Shaft | Ø 31.75 mm | Ø 31.75 mm | Ø 31.75 mm | Ø 31.75 mm | Ø 31.75 mm |
Electricals: | |||||
Motor Power | 5 H.P. / 3.75 KW | 5 H.P. / 3.75 KW | 5 H.P. / 3.75 KW | 5 H.P. / 3.75 KW | 5 H.P. / 3.75 KW |
General: | |||||
Weight (Approx.) | 1350 Kg. | 1500 Kg. | 1800 Kg. | 2000 Kg. | 2250 Kg. |
Floor Space Occupied in (mm) | 2000 x 1000 | 2500 x 1000 | 3000 x 1000 | 3350 x 1000 | 4000 x 1000 |
(Approx.)L x W x H | x 1370 | x 1370 | x 1370 | x 1370 | x 1370 |